Splash Pool Accessories

Spa Heater Gas Controllers

 

Model 3-300-00

Model 3-300-00

Splash Pool Accessories has a range of Spa Gas Heater Controls. There are several types of Gas Heaters on the market today ranging from small inexpensive heaters up to the large spa and pool variety. The small household hot water service units are ideal and easily converted to Spa Heaters by incorporating a controller such as the ones shown here.

The gas heaters come in two varieties.The Flow type which has a pilot flame to ignite the heater when water flows and the electronic ignition type.

  • 3-300-00 Standard Gas Control controls a 24Volt solenoid water valve which controls water into the heater. The knob on the front adjusts the temperature.

Model 3-333-00

Model 3-333-00
  • 3-333-00 Electronic Ignition Heater Control. This is for gas heaters that require 240 Volt ignition to run.

Model  3-300-02TCN3SB

Model 3-300-02TCN3SB
  • The 3-300-02 series controls the water flow. It has two air switches, one to turn on and off the pump and heater and the second,the air blower.
  • 3-300-02TCN. This unit has a time clock which can be used for timed heating operations.
  • 3-300-02TCN3SB. Does the same as the previous one but has a three speed blower instead of a single speed.

 

All SPLASH POOL ACCESSORIES Controllers are approved and comply with Australian Standard AS3136 and New Zealand NZS 6232

[Main] [Air Switch] [Dual Air switch] [Triple Air Switch] [Time Clocks][Gas Controllers][Spa Commander][General][Contact]